Model: CD-36D Table of Contents
-
1
-
Table of Contents
●Safety Information
·······························································································3
(1) Notes on use of the instruction manual ⋅⋅⋅⋅ 3
(2) Meaning of markings ⋅⋅⋅⋅ 3
(3) Safety precautions ⋅⋅⋅⋅ 4
●Warranty
·······················································································································5
1. General
·····················································································································6
(1) Outline of Start-up Procedure ⋅⋅⋅⋅ 6
(2) Configuration of the Transmitter for the Measuring System ⋅⋅⋅⋅ 6
(3) External View ⋅⋅⋅⋅ 8
2. Names of Major Parts
··················································································9
3. Preparation for Operation
······································································10
3.1 Filling of Beads ···································································································· 10
3.2 Filling of Sodium Chloride Tablets ········································································11
3.3 Introduction of Sample Water················································································12
4. Operation
··············································································································14
4.1 Start-up Procedure ··································································································14
4.2 Shutdown of Operation····························································································16
5. Calibration
············································································································17
(1) Zero Calibration ⋅⋅⋅⋅ 17
(2) Span Calibration ⋅⋅⋅⋅ 18
6. Setting of Measuring Range and Output Signal
···············20
6.1 Setting of Measuring Range··················································································20
6.2 Setting of Output Signal in “Maintenance” mode ················································21
7. Maintenance
·······································································································
23
7.1 Maintenance Items·································································································23
7.2 Yearly Consumables and Spare Parts··································································24
7.3 Cleaning of Detector and Replacement of Sensing Electrode····························24
7.4 Replacement of Beads ··························································································26
7.5 Cleaning of Flow Cell·····························································································28
7.6 Adjustment of Output Signal of the Transmitter···················································29
7.7 Replacement of Fuse·····························································································32
7.8 Overhaul and Replacement of Detector ·······························································33
(1) Overhaul of model CLR-21-A detector ⋅⋅⋅⋅ 33
(2) Replacement of CLV Series detector ⋅⋅⋅⋅ 33
To Next Page
Loading...
