Model: CD-36D 7.7 Replacement of Fuse
-
32
-
7.7 Replacement of Fuse
When the fuse is blown out, replace it as follows.
① Turn off the power. ⋅⋅⋅⋅⋅⋅ Open the rear cap and turn off the power switch. (Power: OFF)
Fuse Holder
Tubular Fuse (1A)
Turn counterclockwise
to take out.
Replacement of Fuse
② Withdraw the fuse holder. ⋅⋅⋅⋅⋅⋅ Open the front cap. Then, withdraw the fuse holder by turning it
counter- clockwise.
③ Replace the fuse. ⋅⋅⋅⋅⋅⋅ Take the blown fuse out of the fuse holder and set a new one.
• Specifications of the fuse: Plug-in type tubular fuse 1A
④ Return to the original state. ⋅⋅⋅⋅⋅⋅ Insert the fuse holder loaded with the new fuse and close the
front cap. Then, turn on the power switch and close the rear cap.
To Next Page
Loading...
