Toa DP-0206 Operating Instructions

133-12-669-1A
COM/terminal 1 – 8: Open voltage: 5 V DC, short-circuit current: 25 mA,
terminal block type connector (9 poles)
Direct: Max. 8 memories, Binary: Max. 16 memories
(Any one of 16 memories assignable to each terminal in "Direct" mode.)
Control method: No-voltage make of over 500 ms/No-voltage make pulse of over 500 ms
("No-voltage make of over 500 ms" only in "Binary" mode.)
Pre-coated steel plate, black, 30% glossy
25.6 (w) x 76.5 (h) x101 (d) mm
PC software (Windows 95/98/NT compatible)
60 g
Control Input
Memory Selection
Direct: Max. 4 groups, Binary: Max. 10 groups
(Any output channel or channel group assignable to each terminal)
Control method: 1 step up/down variation with no-voltage make pulse of over 500 ms.
Continuous 1-step variation in 500 ms units with pulse of over 700 ms.
Variation stops with a break pulse.
Variable range: 0 to – ∞ dB
Max. 8 groups (Any output channel or channel group assignable to each terminal)
Control method: No-voltage make of over 500 ms/No-voltage make pulse of over 500 ms
Volume Adjustment
(Up/Down)
Muting (ON/OFF)
Finish
Dimensions
Setting
The above controls can be performed singly or in combination with other controls.
Weight
[Remote Control Module DQ-C01] (optional product)
Notes
•
Windows 95/98/NT are Microsoft Corporation's trademarks.
• The design and specifications are subject to change without notice for improvement.
• Accessories
DP-0206 mounting screw ........................... 2
Terminal block type connector ................... 1
Control

Toa DP-0206 Specifications

General

Brand	Toa
Model	DP-0206
Category	Processor
Language	English