5
2. GENERAL DESCRIPTION
The TOA DP-0206 is a 2-rack unit size Digital Processor provided with signal processing function necessary
for sound systems. The settings of each function are performed from a PC using dedicated software, and can
be stored in the unit's memory. The stored settings can be recalled from the unit without connecting the PC.
3. FEATURES
• Digital signal processing system permits highly-accurate acoustic parameter settings.
• Signal flow and signal processing functions can be freely set from a PC, and the settings can be saved in a file.
• Because 16 memories are built inside, stored data can be easily recalled without connecting a PC after
setting completion.
• Up to 30 DP-0206 units can be simultaneously controlled using the RS-485 port.
• The system-lock function prevents trouble resulting from misoperation.
• Wide power voltage range of 100 – 240 V AC.
• Inputs and outputs can be expanded to up to a total of 12 channels with the addition of an optional DQ-A01
Analog Input Module, and a DQ-A02 Analog Output Module.
• Pattern memory recall, output volume adjustment, and output muting can be controlled from external
equipment with the addition of an optional DQ-C01 Remote Control Module.
4. HANDLING PRECAUTIONS
• Use the unit in locations where the temperature fluctuates in the range of 0 – 40°C, and the humidity is
under 90% (no dew condensation must be formed).
• To avoid the unit's failure, do not give the unit a strong shock or vibration.
• To clean, wipe the unit with a soft cloth. Never use benzine, thinner or chemically-processed towel because
the unit's finish may be adversely affected.
• The unit has no direct parameter setting function. A PC and dedicated software are required for setting
parameters.
• Make sure that the power is switched on only after all connections are completed.
5. ABOUT THE SIGNAL PROCESSING FUNCTION
The DP-0206 is a digital signal processor. Various signal processing functions and value settings are
dependent on PC software. For details of the signal processing functions, refer to the separate software
instruction manual.
To Next Page
Loading...
Need help?
General
