Tonghui TH2523/A - Data Management

TH2523 Series Operation Manual Ver1.2
29
4.1.6 Bus Addr
Bus address is used to control and display the current GPIB interface bus address.
Move the cursor to BUS ADDR, the following items will be displayed in the soft key zone.
 INCR++
Press this key, the instrument increases the number of bus address by 5.
 INCR+
Press this key, the instrument increases the number of bus address by 1.
 DECR-
Press this key, the instrument decreases the number of bus address by 1.
 DECR--
Press this key, this instrument decreases the number of bus address by 5.
The bus address number ranges from 0 to 31.
4.1.7 Time
Set the correct date and time at the local time zone.
For example: 9 o’clock 13 minute and 25 second a.m. on November 12, 2010 will be shown as
10-11-12 09:13:25.
Operations are as follows: Touch the time zone to be modified, the following items will be
displayed.
 INCR++
Press this key, the time will increase by 5.
 INCR+
Press this key, the time will increase by 1.
 DECR-
Press this key, the time will decrease by 1.
 DECR--
Press this key, the time will decrease by 5.
4.2 <File Manage>
TH2523 series can save parameters that are set by user to the internal non-volatile memory in
the file format. User can load the file to use these parameters instead of resetting.
This section will introduce the information about the function of Save/Recall.
Notation Explanation:
E: Abbreviation of External, representing external memory, like U disk.
I: Abbreviation of Internal, representing internal memory, like internal Flash.