Tonghui TH2523/A - Comparator and Bin Setup

TH2523 Series Operation Manual Ver1.2
59
The :DELay command sets the delay time after triggering.
The TRIGger:DELay? query returns the current delay time.
Command syntax:
<value>
TRIGger:DELay MIN
MAX
Details are as follows:
<value> In NR1, NR2 or NR3 data format ranging from 0S to 60S by a
resolution of 1mS.
MIN Set the delay time as 0S.
MAX Set the delay time as 60S.
For example: WrtCmd(“TRIG:DEL 5S”); Set the delay time as 5S, the default unit is S.
Query syntax: TRIGger:DELay?
Return format: <NR3><NL^END>
7.1.5 FETCh? Subsystem Commands
FETCh? subsystem commands are used to make TH2523 output a measurement result.
Command syntax: FETCH?
7.1.6 COMParator Subsystem Commands:
COMParator subsystem commands are used to set bin comparator functions, such as
comparator ON/OFF, limit list.
Command Tree: