Tonghui TH2523/A - Trace Subsystem Commands

TH2523 Series Operation Manual Ver1.2
69
Response: <Cp(NR2)>,<Cpk(NR2)>
For example: Syntax: :STATI:CP?
Response: 0.86, 0.14
7.1.9 TRACe Subsystem Commands
The :TRACe:TOTAL <value> command is used to set and return the total time of scanning.
For example: :TRACe:TOTAL 20
Query syntax: :TRACe:TOTAL?
Response: <value NR2>
The TRACe:INTERval <value> command is used to set and return the interval time between
trace scanning.
For example: :TRACe:INTER 1.5
Response: <value NR2>