Tonghui TH2523/A - SCPI Command Reference; TH2523 Subsystem Commands Overview

TH2523 Series Operation Manual Ver1.2
49
Chapter 7 SCPI Command Reference
1. Data Conventions of This Manual
NR1：integer, for example:123
NR2：fixed number, for example: 12.3
NR3：floating number, for example: 12.3E+5
NL：CR character，integer: 10
^END：EOI (end) signal of IEEE-488 bus.
7.1 TH2523 Subsystem Commands
●DISPlay ●TRIGger ●COMParator ●APERture ●SYSTem
●FUNCtion ●FETCh? ●Mass MEMory ●STATistical ●TRACe
●BINSETup
7.1.1 DISPlay Subsystem Commands
DISPlay subsystem commands are mainly used to set the instrument display page.
The :DISPlay? query returns the current page.
Command Tree:
The :PAGE command sets the display page.
The DISPlay:PAGE? qurey returns the current page.
Command Syntax: DISPlay:PAGE <page name>