Tonghui TH2523/A - Page 61

TH2523 Series Operation Manual Ver1.2
56
Query syntax: FUNCtion:DEV<n>:REFerence?
Return format: <NR3><NL^END>
The :DEV<n>:REFerence:FILL sets the nominal value of deviation. It controls the instrument
to make a measurement and copies primary and secondary resluts as nominal value.
Command syntax: FUNCtion:DEV<n>:REFerence:FILL
Where,
<n> may be character 1 (integer: 49) or character 2 (integer: 50). Both above
characters can set primary and secondary deviation nominal values.
For example: WrtCmd(“FUNC:DEV1:REF:FILL”);
The :REL ON command controls the rel function.
OFF
Command syntax: FUNC:REL ON
Return format: FUNC:REL?
Return: 1 (integer: 49) means ON.
0 (integer: 48) means OFF.
:SHORT:IMM
The :SHORT:IMM command executes the short function.
Command syntax :FUNC:SHORT:IMM
:SHORT ON(1)
OFF(0)
This command switches the short function to ON or OFF.
Command syntax: :FUNC:SHORT ON
Query syntax: :FUNC:SHORT?
Return: 1(49) means ON.
0(48) meansOFF.
:ACFREQuency 50
60
This command is used to control the supply frequency.
Command syntax: :FUNC:ACFREQuency 50
Query syntax: :FUNC:ACFREQuency ?