TH2523 Series Operation Manual Ver1.2
62
Command Tree:
The:BINSETup:BinMode command set the bin compare mode. The:BINSETup:BinMode?
query returns the current compare mode.
Command syntax: BINSETup:BinMode ABS
PERcent
ABS absolute value mode
PERcent percentage mode
For example: WrtCmd(“BINSETup:BinMode ABS”)
Query syntax: BINSETup:BinMode?
Return value：<NR1><NL^END>
<NR1> is 0 absolute value mode
1 percentage mode
The:BINSETup:COMPareA command set the primary parameter as ON/OFF.
The:BINSETup:COMPareA? query returns current status of primary parameter.
Command syntax: BINSETup:COMPareA ON(1)
OFF(0)
ON set the primary parameter function as ON
OFF set the primary parameter as OFF
For example: WrtCmd(“BINSET: COMPA ON”)
Query syntax: BINSETup:COMPA?
To Next Page
Loading...
