Tonghui TH2523/A - Page 77

TH2523 Series Operation Manual Ver1.2
72
<value> The serial number of file ranging from 1 to 100 (NR1).
For example: WrtCmd(“MMEM:LOAD:STAT 1”);
The :STORe:STATe command saves the current settings into a file.
Command syntax: MMEMory:STOR:STATe <value>，<name>
Where,
<value> The serial number of file ranging from 1 to 20 (NR1).
<name> File name (.STA is not attached, and the name length is not more than
15 characters)
For example: WrtCmd(“MMEM:STOR:STAT 1,ABC”);