EasyManuals Logo

Topcon GPT-7502 User Manual

Topcon GPT-7502
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
114
10 POWER SOURCE AND CHARGING
Note: 1 Recharging should take place in a room with an ambient temperature range of
10°C to 40°C (50°F to 104°F).
2 If charging is done at high temperature, charging time of the battery may take
longer.
3 Exceeding the specified charging time may shorten the life of the battery and
should be avoided if possible.
4 The battery source will discharge when stored and should be checked before using
with instrument.
5 If the instrument is not used over an extended period of time, store in a place at
30°C or below in a 50% charged state.
Over discharge will lower performance and a full charge may become impossible.
Please charge once every few months.
Do not charge continuously, otherwise the battery and the charger may be deteriorated.
If charging is necessary, use the charger after stopping charge for approximately 30 minutes.
Do not charge the battery in right after the battery is charged, it causes deterioration of the battery
in rare cases.
The charger may develop heat while charging, there is no problem of it.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Topcon GPT-7502 and is the answer not in the manual?

Topcon GPT-7502 Specifications

General IconGeneral
BrandTopcon
ModelGPT-7502
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals