Topcon GPT-7502 - Set the Automatic Backup for Every Suspension; Set the Restoration Disabled after Hardware Reset

22
1 NOMENCLATURE AND FUNCTIONS
1.4.2 Set the Automatic Backup for Every Suspension
1
On the "RAM Backup" Screen, please check it 'ON' the "RAM data will be backed up before
suspension.".
(Factory setting is 'ON' as default)
2 Press the [OK] key on title bar. After that, "RAM Backup" screen will close automatically.
1.4.3 Set the Restoration Disabled after Hardware Reset
1
On the "RAM Backup" Screen, check it 'OFF' the "Data restoration after hard reset.".
(Factory setting is 'ON' as default)
2 Press the [OK] key on title bar. After that, "RAM Backup" screen will close automatically.