Topcon GPT-7502 - Program Mode

72
4 PROGRAM MODE
4 PROGRAM MODE
Select the menu by pressing panel icon.
Setting a direction angle for backsight orientation
Refer to Chapter 4.1 “Setting a Direction Angle for Backsight Orientation(BS)” .
Repetition angle measurement
Refer to Chapter 4.4 “Repetition Angle Measurement (REP)” .
Missing line measurement
Refer to Chapter 4.3 “Missing Line Measurement (MLM)” .
Remote elevation measurement
Refer to Chapter 4.2 “Remote Elevation Measurement (REM)” .
Main menu
Press the [PROG] icon.
Program mode menu