113
20. CHANGING THE SETTINGS
• If the weather correction is not required, set the ppm value to 0.
PROCEDURE Recording and editing target information
The [LIST] softkey is displayed when either "Reflector" or "Prism const." is selected in the "EDM" tab
of <EDM configurations>.
1. Press [LIST] to display a list of all recorded
targets.
• [ADD]: Displays <Reflector list>. Select the
desired target from this list and press [OK] to
register in the list in <Reflector setting>. Up to a
maximum of 6 targets can be recorded.
• [DEL]: Deletes the selected target.
To Next Page
Loading...
