41
10.CONNECTING TO EXTERNAL DEVICES
The OS supports Bluetooth wireless technology, USB and RS232C for communication with data
collectors etc. Inputting/outputting data is also possible by inserting a USB memory or by connecting
to a USB device.
Read this manual in conjunction with the operator’s manual for the relevant external device.
• Bluetooth communication is only possible with instruments incorporating the Bluetooth module.
• When doing Bluetooth communication, read "4.3 Bluetooth Wireless Technology"
The Bluetooth module incorporated in the OS can be used for communication with Bluetooth devices
such as data collectors.
Bluetooth connection mode
Communication between a pair of Bluetooth devices requires one device to be set as the
"Master" and the other as the "Slave". To initiate connections from the OS side, set the OS as
the "Master" device. To initiate connections from the paired device side, set the OS as the
"Slave" device. Always set the OS to "Slave" when connecting with a data collector to perform
measurements and to record the data. Only "Slave" can be selected when the instrument is
shipped.
PROCEDURE Set Bluetooth communication mode to "Slave"
1. Select "Comms" in Config mode.
10.1 Wireless Communication using Bluetooth Technology
To Next Page
Loading...
Need help?
General
