20. CHANGING THE SETTINGS
124
Setting a password allows you to protect important information such as measurement data.
No password was set when the OS was shipped. When setting a password for the first time, leave the
"Old password" box blank.
When a password has been set, the password screen will appear when the OS is powered ON. Input
the password to continue.
Items set
Old password: Input current password
New password: Input the new password
New password again: Input the new password again
• Password can be up to 16 characters in length. Input characters will be displayed as asterisks.
• To deactivate the password function, perform the new password setting procedure but enter a
"space" in the "New password" box.
• The password function will not be canceled when a cold boot is performed.
20.9 Changing Password
To Next Page
Loading...
