5. Preparation and Functions
21
• For Charging
1 Plug the AC/DC converter (AD-15) into the
DB-74C battery holder or plug the AD-15
into the battery pack BT-74Q.
2 Insert the AD-15 power cord in an outlet.
3 Complete charging by unplugging the plug
from the DB-74C battery holder or battery
pack BT-74Q after approximately 13
hours.
4 Unplug the AD-15 power cord from the
outlet.
• RUN charge
As illustrated at the right, while charging is
in process with the power supply unit
installed to the instrument, you can use the
instrument.
Plug
AD-15