EasyManua.ls Logo

Topcon TRC-NW400 - Preparations; Installation

Topcon TRC-NW400
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
PREPARATIONS
PREPARATIONS
INSTALLATION
1 Firmly hold the instrument at the position shown below and place it on the automatic instrument
table.
CAUTIONS
•The instrument should be moved by two people holding the bottom of
the device. Be sure to hold the bottom with two people.
To avoid injury, be aware of projections at the bottom.
Carrying by one person may cause harm to his/her back or injury by
falling parts. Also, holding areas other than the bottom and holding the
terminal cover may cause injury, as well as damage to the instrument.
•To prevent damage and injuries, do not install the instrument on an
uneven, unsteady or sloped surface.
•When setting an instrument on an instrument table, pay attention not
to catch the patient's fingers between the instrument and the table.
NOTES
Do not place the instrument in an area where it will be exposed to direct sun-
light.
Automatic alignment may not be performed correctly.
Holding positions
Holding the instrument
Terminal cover

Table of Contents

Related product manuals