Topcon TRC-NW400 - Cleaning

94
MAINTENANCE
CLEANING
Cleaning the external cover, control panel and other parts
1 When the external cover and control panel screen become stained, clean them with a dry cloth.
2 If the external cover or the control panel is badly stained, prepare a tepid solution of neutral
detergent. Moisten a cloth and wring it thoroughly. Then, wipe the cover or panel with the cloth.
Cleaning of the parts which come into contact with the patient
x Before using the instrument, clean the forehead rest unit and chinrest unit.
Mix neutral detergent in tepid water. Moisten a cloth and wring it thoroughly. Then, wipe the fore-
head rest and chinrest with the cloth.
Cleaning the control panel
When the control panel is stained by dust or the like
First, remove dust lightly with a soft brush, etc. Then, wipe the screen lightly with the dry monitor
cleaner, which is an accessory.
CAUTIONS
To avoid damage to the instrument or injury due to electric shock, turn
off the power switch and remove the power cord before cleaning the
instrument.
NOTES
•Do not spray liquid on the instrument. The instrument may be damaged or
those that come into contact with the instrument may be injured by electric
shock.
•Do not spray the cleaner solution directly toward the instrument. If the solu-
tion comes into the instrument through a vent or others, the instrument may
malfunction.
•When the instrument is not in use, turn off the power switch.
•To prevent the plastic parts of the instrument body from discoloring and deteri-
orating, do not use volatile solvents for cleaning, such as benzine, thinner,
ether, gasoline, etc.
•Do not apply the lubricating oil such as machine oil to the sliding board. It may
deteriorate and affect the operability adversely.
NOTES
•The control panel is a touch panel. Before wiping it, turn off the power switch.
If not, the touch panel responds to the wiping action and may cause a trouble
in operation.
•When the monitor cleaner is dirty, wash and re-use it. Rinse the monitor
cleaner until the cleanser does not remain on it any more. If the cleanser
remains on the monitor cleaner, the control panel is not wiped uniformly from
time to time.