65
BASIC OPERATIONS
SAVING DATA
Tap the button while the preview screen is being displayed. The data that is displayed on the pre-
view screen is saved.
If the preview screen is not displayed, the data is saved automatically.
When tapping the button in the DICOM connection status, the image is sent to the DICOM server.
When connected to IMAGEnet, the image is sent to IMAGEnet.
PRINTING DATA
Tap the button while the printer is connected. Printing starts.
CAUTIONS
•While the message showing that data is being transferred is displayed,
do not turn off the instrument. If you turn off the instrument during data
transfer, the data may be lost.
•Right after "Please wait" is displayed during saving, do not turn off the
power. Data may be lost.
•The saved data includes private information. Be very careful when
setting the external save destination or when handling the USB mem-
ory.
NOTES
•When the USB memory is connected, data is saved in the USB memory even
if the data is not saved into an external save destination successfully.
•Before saving data into an external save destination, make sure that the user
authority is proper. For the setting method, contact your dealer or the offices
listed on the back cover.
•If data is being transferred or there is any data that is not transferred in
DICOM connection, a message is displayed on the operation guide area.
•For connecting the DICOM server, contact your dealer or the offices listed on
the back cover.
To Next Page
Loading...
