Topcon TRC-NW400 - Safety of Led Product

78
SPECIFICATIONS AND PERFORMANCE
SAFETY OF LED PRODUCT
CAUTIONS
•Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation expo-
sure.
•Do not remove the enclosures. LED high-power is radiated.
Class of LED product CLASS1 LED PRODUCT(IEC60825-1:1993+A1:1997+A2:2001)
LED OUTPUT IR LED
Aperture of LED Objective lens*
Output of cornea 800µW
Wavelength 850nm
Half width 30nm
Beam divergence 0.785rad
Pulse width CW
SPLIT LED
Aperture of LED Objective lens*
Output of cornea 40µW
Wavelength 870nm
Half width 35nm
Beam divergence 0.015rad
Pulse width CW
ANT OBS LED
Aperture of LED Filter for anterior observation*
Output of cornea 65µW
Wavelength 950nm
Half width 50nm
Beam divergence 0.06rad
Pulse width CW
ZEN FIX LED
Aperture of LED Hole for anterior fixation*
Output of cornea 0.5µW
Wavelength 568nm
Half width 30nm
Beam divergence 0.044rad
Pulse width CW
EXT FIX LED
Aperture of LED EXT_FIX_LED*
Output of cornea 120.5µW
Wavelength 565nm
Half width 30nm
Beam divergence 0.785rad
Pulse width CW