32
PREPARATIONS
CONNECTING THE POWER CORD
1 Make sure the POWER switch of the instrument is turned OFF.
2 Tilt the body slowly so that the POWER switch is on top and the power inlet at the bottom can be
seen.
3 Connect the power cable to the Power inlet.
4 Insert the power cable plug into the 3-pin AC
grounding receptacle.
CAUTIONS
•Be sure to connect the power plug to an AC 3-pin receptacle equipped
with grounding. Connection to a receptacle without grounding may
cause fire and electric shock in the case of shortcircuiting.
•To avoid electric shocks, do not handle the power plug with wet fin-
gers.
To Next Page
Loading...
