Toro 07253 Service Manual

Workman 1100/2100/2110 Drive TrainPage 5 – 23
1. Counter shaft
2. Spacer
3. Needle bearing
4. Gear 34
Figure 34
1
4
3
2
B. Pull out counter shaft. Remove spacer, needle
bearing, gear 34, and spacer.
1. Counter shaft
2. Spacer
3. Needle bearing
4. Gear 34
Figure 35
1
2
3
4
2
C. Replace counter shaft if it has abnormal wear,
cracks, or damage.
D. Replace spacer if either one is cracked or bent.
E. Replace needle bearing if needles are bent, do
not rotate freely, or do not remain in the bearing cage.
F. Replace gear 34 if worn or damaged. Cracked,
broken, missing, or chipped gear teeth are not ac-
ceptable.
Drive
Train

Toro 07253 Specifications

General

Brand	Toro
Model	07253
Category	Utility Vehicle
Language	English