Toro 41593 - Page 62

Figure84
AgitationValveManifold
1.Stemretainer7.BackseatingO-ring(0.676
inch/0.07inch)
2.Valvestem8.Valveseatring
3.Stemport9.Mainfoldbody
4.Stemcaptureretainer
10.Ballvalve
5.Endcaptting11.Endcapttingassembly
6.EndcapsealO-ring(0.796
inch/0.139inch)
Figure85
SectionValveManifold
1.Valvestemseat
7.EndcapO-ring(0.796inch
/0.139inch)
2.Valvestemassembly
8.BackseatingO-ring(0.676
inch/0.07inch)
3.Stemport
9.Ballseat
4.Stemretainer10.Mainfoldbody
5.OutletttingO-ring(0.737
inch/0.103inch)
11.Ballvalve
6.Endcaptting12.Endcapttingassembly
3.Turnthevalvestemsothattheballisintheopen
position(AofFigure83).
Note:Thevalvestemwillbeparallelwiththevalve
owandtheballwillslideout.
4.Removethestemretainerfromtheslotsinthestem
portinthemanifold(Figure84andFigure85).
5.Removethestemretainerandvalvestemseatfromthe
manifold(Figure84andFigure85).
6.Reachintothemanifoldbodyandremovethevalve
stemassembly(Figure84andFigure85).
7.Cleantheinsideofthemanifoldandexteriorofthe
ballvalve,valvestemassembly,stemcapture,andend
ttings.
62