Toro 74265TE - Page 66

LevelingtheMowerSide-to-Side
1.Positiontherightbladeside-to-side(Figure97).
g006888
Figure97
1.Measureherefromblade
tohardsurface
2.MeasureatBandC
2.MeasuretherightbladeattheBlocation,fromalevel
surfacetothecuttingedgeofthebladetip(Figure97).
3.Recordthismeasurement.Thismeasurementneedsto
be80to83mm(3-1/8to3-1/4inches).
4.Positiontheleftbladeside-to-side(Figure97).
5.MeasuretheleftbladeattheClocation(Figure97),
fromalevelsurfacetothecuttingedgeofthebladetip.
6.Recordthismeasurement.Thismeasurementneedsto
be80to83mm(3-1/8to3-1/4inches).
7.IfthemeasurementsatpositionsBorCarenot
correct,loosentheboltattachingtherearchaintothe
rear-supportarm(Figure98).
g001040
Figure98
1.Rearchain5.Adjustmentbolt
2.Rear-supportarm6.Frontswivel
3.Bolt7.Front-supportarm
4.Jamnut
8.Loosenthejamnutundertherear-supportarmand
adjusttheadjustmentbolttogetameasurementof80
to83mm(3-1/8to3-1/4inches);refertoFigure98.
Note:Itisrecommendedthatbothsidesofthe
mowerareadjustedthesamedistance.
9.Tightenthejamnutundertherear-supportarmand
tightentheboltsecuringthechaintotherear-support
arm.
10.Adjusttheoppositesideifneeded.
AdjustingtheFront-to-RearMower
Pitch
1.Positiontherightbladefront-to-rear(Figure99).
g001041
Figure99
1.Measureherefromblade
tohardsurface
2.MeasureatAandB
66