Toro ProPass 200 - Chapter 3 - Hydraulic System; Specifications

ProPass 200Page 3 -- 2Hydraulic System
Specifications
Item Description
Tow Vehicle Hydraulic Supply
Minimum Supply 6 US Gal/Min (23 L/Min) @ 2000 PSI (138 Bar)
Maximum Supply 10 US Gal/Min (38 L/Min) @ 2800 PSI (190 Bar)
Floor Motor Eaton fixed displacement geroler motor
Displacement (per revolution) 22.7 in
3
(371 cc)
Twin Spinner Motors (Rear Option) Eaton fixed displacement geroler motor
Displacement (per revolution) 1.8 in
3
(29 cc)
Conveyor Motor (Rear Option) Eaton fixed displacement geroler motor
Displacement (per revolution) 1.8 in
3
(29 cc)
NOTE: If tow vehicle provides hydraulic supply, use tow
vehicle hydraulic specifications for information regard-
ing hydraulic flow and relief pressure to the ProPass. If
hydraulic power pack provides hydraulic supply, see
Chapter 6 -- Hydraulic Power Pack Assembly for inform-
ation regarding hydraulic circuit flow and relief pressure
specifications.