Toro ProPass 200 - Chapter 4 Electrical System; ELECTRICAL SCHEMATICS; TROUBLESHOOTING; COMPONENT TESTING

ProPass 200 Electrical SystemPage 4 -- 1
Chapter 4
Electrical System
Table of Contents
GENERAL INFORMATION 3.....................
Operator ’s Manual 3..........................
Machine Hydraulic Control 3...................
ELECTRICAL SCHEMATICS 4...................
ProPass with Standard Hydraulic Controls 4......
ProPass with Electronic Hydraulic Controls 5.....
WIRE HARNESS DRAWINGS 6..................
Power Lead Wire Harness 6...................
Hydraulic Power Pack Power Lead
Wire Harness 6.............................
Intermediate Power Wire Harness 7.............
Main Va lve Wire Harness (Standard Hydraulic
Controls) 8.................................
Pendant Wire Harness (Standard Hydraulic
Controls) 9.................................
Bulkhead Wire Harness (Electronic Hydraulic
Controls) 10................................
SPECIAL TOOLS 12............................
TROUBLESHOOTING 14........................
COMPONENT TESTING 16......................
E--Stop Button (Machines with Electronic
Hydraulic Controls) 16.......................
Pendant Assembly (Machines with Standard
Hydraulic Controls) 17.......................
Wireless Remote (Machines with Electronic
Hydraulic Controls) 18.......................
Wireless Remote Base Unit (Machines with
Electronic Hydraulic Controls) 20..............
Hydraulic Solenoid Valve Coils 21...............
Electrical
System