Toro RT1200 - Page 24

Figure19
1.Fillerneck
2.Fuel-tankcap(off)
Note:Removethecapslowlytoreducetheair
pressurebuildup.
2.Fillthefueltanktothebottomofthenecktoallow
spaceforthefueltoexpand.
Note:Thefueltankcapacityis182L(48USgal).
3.Installthefuel-tankcapandtightenitsecurelybyhand.
DrainingWaterfromtheFuel-Water
Separator
ServiceInterval:Beforeeachuseordaily
1.Removetheleftsidepanel;refertoRemovingtheSide
Panels(page45).
2.Placeadraincontainerbelowthedrainvalveonthe
fuel-waterseparator(Figure20).
Figure20
1.Fuel-waterseparator2.Drainvalve
3.Rotatethedrainvalvecounterclockwiseapproximately
3-1/2turnsuntilthevalvedropsdownfromthe
fuel-waterseparator(Figure21).
Note:Thevalveshouldextend25mm(1inch)from
theseparator.
Figure21
1.Openthedrainvalve.3.Closethedrainvalve.
2.Drainthewater.
4.Drainthewaterandsedimentfromtheseparatoruntil
clearfuelisvisible(Figure21).
5.Liftupthevalveandturnitclockwiseuntilitishand
tight(Figure21).
Note:Donotovertightenthedrainvalveofthe
fuel-waterseparator;overtighteningthevalvecan
damagethethreadsofthevalve.
6.Installtheleftsidepanel;refertoInstallingtheSide
Panels(page46).
24