Toro TIMECUTTER HD 75212 - Electric PTO Clutch

8-17
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
MOWER DECK
Deck
Electric PTO Clutch
Removal
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove key.
2. Disconnect the battery terminals.
3. Raise and support the unit so that the drive wheels are off the ground.
4. Remove the mower belt, see “Mower Belt Replacement,” chapter 3, page 3-15.
5. Disconnect the clutch wire connector from the clutch.
6. Remove the clutch mounting bolt and washers. Slip the clutch off of the crankshaft.
A
B
C
D
E
F
Figure 17
A. Engine Pulley to Shaft
(Apply Anti-Seize)
B. Bolt, Clutch Stop Mount
C. Clutch Stop
D. Clutch Isolator
E. Clutch PTO
F. Clutch Mounting Bolt
(Apply Loctite)