5-34
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
CHASSIS
Motion Control Assembly (Cont.)
Installation
1. Position the motion control assembly in place with the linkage extending toward the transmission.
2. Secure the motion control assembly to the frame.
3. Connect the motion control linkage to the motion control assembly.
4. Connect the motion control damper to the motion control assembly.
5. Connect the motion control handle to the motion control assembly using the two bolts.
6. Adjust the neutral setting, see “Hydrostatic Drive Transmission,” chapter 7, page 7-13.
7. Lower the unit and verify proper function.
8. Adjust the tracking if necessary, see “Tracking Adjustment,” chapter 7, page 7-6.
To Next Page
Loading...
