Toro TIMECUTTER HD 75212 - Ignition and Safety Switches

9-5
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
ELECTRICAL
Electrical
Key/Ignition Switch
The ignition switch makes the proper connections for the starter, safety circuits, and accessories. Detents inside
the switch control the three switch positions: OFF, RUN, and START. The START position is spring loaded so that
it automatically returns to the RUN position when released.
Ignition Switch Wiring Connections
B - Battery Voltage In
S - Starting Circuit
I - PTO Switch
A - Operator Presence Switch, Safety Interlock Switches
R - Regulator, Charging Circuit
Figure 4
(Ignition)
I
(Start)
S
(Battery)
B
(Rectifier)
R
(Accessory)
A
Figure 5