Toro TIMECUTTER HD 75212 - Fuse Block and Fuses; Fuses Testing

9-4
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
ELECTRICAL
Fuse Block and Fuses
The fuse block houses the fuses that protect the electrical system from electrical surges. The other fuse next to
the relay is seen in Figure 20, page 9-19.
NOTE: Always use Toro fuses when replacing a damaged or blown fuse.
Testing
1. Visual Inspection: The fuses used in this application may be visually inspected. A failed fuse can be identied
by a broken or melted element inside the fuse cover or a damaged spade (Figure 3).
2. Using a digital multi-meter set to the OHM or Continuity setting, check the continuity between the fuse blades. If
the fuse is OPEN (no continuity), replace the fuse and test the circuit.
Figure 2
Figure 3
Bad Good