EasyManua.ls Logo

Toro TIMECUTTER HD 75212 - Servicing the Engine Oil; Checking the Engine Oil Level

Toro TIMECUTTER HD 75212
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-6
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
MAINTENANCE
Servicing the Toro Engine (Cont.)
Servicing the Engine Oil
Recommended Oil: Toro 4-Cycle Premium Engine Oil
Oil Type: Detergent Oil (API service SF, SG, SH, SJ, or SL)
Crankcase Capacity: 2.4 L (2.5 qt.)
Viscosity: See table below (Figure 4)
Checking the Engine Oil Level
Service Interval: Before each use or daily
NOTE: Check engine oil level when engine is cold.
NOTE: Do not overll the crankcase with oil and run the engine; engine damage may result.
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove key. Engage the parking brake.
2. Make sure the engine is stopped, level, and is cool so the oil has had time to drain into the sump.
3. To keep dirt, grass clippings, etc., out of the engine, clean the area around the oil ll cap/dipstick before
removing it.
Figure 4

Table of Contents

Related product manuals