Toro TIMECUTTER HD 75212 - Toro Twin Cylinder Engine

6-3
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
ENGINE
Engine
Toro Twin Cylinder Engine
Removal
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove key. Engage the parking brake.
2. Disconnect the battery.
3. Remove the engine guard.
4. Remove the mufer.
5. Remove the mower belt, see “Mower Belt Removal,” chapter 3, page 3-15.
6. Remove the hydrostatic drive belt, see “Hydrostatic Drive Belt Removal,” chapter 7, page 7-9.
7. Disconnect the chassis wire harness from the main engine wire harness (Figure 2).
Figure 2