9-15
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
ELECTRICAL
Electrical
Electric PTO Clutch (Cont.)
Coil Resistance Measurement
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop
and remove the key. Engage the parking brake.
2. Disconnect the clutch wire connector.
3. Set the multi-meter to measure resistance (OHMs setting).
4. Connect the meter lead wires to the terminals in the clutch connector.
5. See the PTO Clutch Electrical Specications chart.
Resistance (OHMs) AMP Draw Continuity to Ground
3.05 ± 5% 3.93 OPEN
Figure 15
To Next Page
Loading...
