3-19
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
MAINTENANCE
Maintenance
Changing the Blades
Removal
Replace the blade if it hits an object, if the blade is out of balance, or if the blade is bent. To ensure optimum
performance and continued safety conformance of the machine, use genuine Toro replacement blades.
Replacement blades made by other manufacturers may result in non-conformance with safety standards.
1. Hold the spindle shaft with a wrench.
2. Remove the blade bolt, curved washer, and blade from the spindle shaft (Figure 14).
Figure 14
A. Sail Area of the Blade
B. Blade
C. Curved Washer
D. Blade Bolt
To Next Page
Loading...
