Toro TIMECUTTER HD 75212 - Installation

5-18
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
CHASSIS
Seat & MyRIDE™ Platform - TIMECUTTER® HD MR Models Only (Cont.)
Installation
1. Verify that the fuel tank hold down is seated properly in the front and rear of the frame and secured with the
hold down bolt (Figure 21).
2. Lower the MyRIDE™ assembly onto the main frame, aligning the frame brackets on each side with the mating
holes in the main frame. Reconnect the fuel line keeper under the seat.
3. Install the two bolts and nuts securing the frame brackets to the main frame on each side of the machine.
(Figure 22).
Figure 21
Figure 22