Toro TIMECUTTER HD 75212 - Page 29

3-9
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
MAINTENANCE
Maintenance
Servicing the Toro Engine (Cont.)
Changing the Engine Oil and Oil Filter (Cont.)
3. Change the oil lter.
NOTE: Ensure that the oil lter gasket touches the engine and then turn the lter an additional ¾ turn
(Figure 7).
4. Slowly pour approximately 80% of the specied oil into the ller tube. Check the oil level and slowly add the
additional oil needed to bring it to the FULL mark (Figure 8).
B
A
C
D
E
F
Figure 8
Figure 7
B
A
C D
E
F
3/4
B
B