Carburetor
Troubleshooting 5-3
Engine Starts Hard 5-3
Engine Runs Rich 5-3
Engine Runs Lean 5-3
Fuel Leaks From Carburetor 5-3
Introduction 5-4
Identification 5-4
Operation 5-4
Governor
5-5
Servicing 5-5
Removal 5-5
Disassembly 5-7
Cleaning and Inspection 5-9
Assembly 5-9
Installation 5-1
Presetting the Governor 5-12
Final Check 5-12
Engine
Advantages Description 9-3
Operation 9-3
Service Tips 9-5
Cylinder/Crankcase Halves 9-5
Oil Seals
9-5
Core Plugs 9-6
Muffler Baffle 9-6
Exhaust Ports 9-7
Carburetor Gaskets 9-7
Removal 9-7
Disassembly 9-1
Inspection And Repair 9-12
Reed Valve Service 9-13
Reassembly 9-14
Reinstalling External Components 9-17
Fuel System
Operation
6-3
Fuel Tank
6-3
Fuel Cap 6-3
Service 6-4
Fuel Cap 6-4
Tank Removal 6-4
Cleaning 6-5
Tank Installation 6-6
Fuel Storage 6-6
Ignition System
Troubleshooting 7-3
Process 7-3
Spark Plug 7-4
Operation 7-4
Service 7-4
CD
Pack
7-4
Advantages 7-4
Operation 7-5
Air Gap Adjustment 7.6
Removal/lnstallation 7-6
Flywheel 7.6
Operation 7.6
Removal 7.7
Installation 7-8
Maintenance
Air Filter 4.3
Cleaning 4.3
Spark Plug 4.4
Spark lug Gap 4.5
Spark Plug Torque 4.5
Exhaust System 4.5
Cleaning 4.5
Reassembling 4.7
Rewind Starter
Operation 8.2
Recoil Assembly/Replacement 8-2
Starter Rope Replacement 8-2
Specifications
Engine Specifications 1-3
Engine Fastener Torque Requirements 1-4
Carburetor Specifications 1-4
Tool requirements
2-2
Troubleshooting
Engine Will Not Start When “cold“ 3-3
Engine Will Start When “cold.
But Not When “hot” 3.3
Engine Will Not Produce Spark 3.3
Engine Backfires 3.5
Engine Overheats 3.5
Engine Vibrates Excessively 3-5
Engine Crankshaft Will Not Turn 3-5
Spark Plug Fouled 3.7
Zone Start Brake
Introduction 10-3
Operation 10-3
Disassembly 10-4
Assembly 10-6
To Previous Page
Loading...
