Toro Workman HDX Series - Page 60

g009822
Figure75
1.Quick-couplerhoseA
2.Quick-couplerhoseB
3.Onthedisabledmachine,connectthe2jumper
hosestothehosesthatweredisconnected
(Figure76).
4.Captheunusedttings.
g002429
Figure76
1.Disconnectedhoses2.Jumperhoses
5.Ontheothermachine,connectthe2hosesto
thecouplerstillinthecouplerbracket(connect
thetophosetothetopcouplerandthebottom
hosetothebottomcoupler)(Figure77).
6.Captheunusedttings.
g019543
Figure77
1.Jumperhoses
7.Keepallbystandersawayfromthemachines.
8.Startthesecondmachineandmovetheliftlever
totheraiseposition,whichraisesthedisabled
cargobed.
9.Movethehydraulic-liftlevertotheNEUTRAL
position,andengagethelift-leverlock.
10.Installthebedsupportontotheextendedlift
cylinder;refertoUsingtheBedSupport(page
32).
Note:Withboththemachineturnedoff,move
theliftleverbackandforthtoremovethesystem
pressureandeasethedisconnectionofthe
quickcouplers.
11.Aftercompletingtheoperation,removethe
jumperhosesandconnectthehydraulichoses
tobothmachines.
Important:Checkthehydraulicuid
levels,inbothmachines,beforeresuming
operation.
60