Toshiba B-SA4T User Manual

- 102 -
6.3 How to Connect the Printer to LAN
Right-click the printer icon, open the Properties, add a printer port, and specify it as an output port.
The output port to be used differs depending on the printer models and communication methods
(unidirectional/bi-directional).
 Printer Port Types
LAN interface
Printer model
Method
Printer board
Standard TCP/IP Port
Optional LAN board
B-SV704-LAN-QQ/
QP-R
B-SV4D (Except GS12)
B-SV4T
Unidirectional
Raw or LPR protocol
B-9700-PCM-QM-R
B-SX4T (203 dpi)
B-SX5T (305 dpi)
Unidirectional
Raw or LPR protocol
B-9700-LAN-QM-R
Bi-directional
Raw protocol
Standard feature
B-EV4 (203 dpi)
B-EV4 (300 dpi)
Unidirectional
LPR protocol
B-SA4T (203 dpi) / B-SA4T-CN (203 dpi)
B-SA4T (300 dpi) / B-SA4T-CN (300 dpi)
B-852-R
B-452-R
B-462-R
B-EP2DL-G
B-EP4DL-G
B-SV4D-GS12-QM-R
B-SX6T (305 dpi)
B-SX8T (305 dpi)
B-EX4T1 (203 dpi)
B-EX4T1 (305 dpi)
B-EX4T2 (203 dpi)
B-EX4T2 (305 dpi)
B-EX4T2 (600 dpi)
B-EX4D2 (203 dpi)
B-EX6T1 (203 dpi)
B-EX6T1 (305 dpi)
B-EX6T3 (203 dpi)
B-EX6T3 (305 dpi)
B-EX4T3 (600 dpi)
B-FV4 (203 dpi)
B-FV4 (300 dpi)
B-FP3D (203 dpi)
Unidirectional
Raw or LPR protocol
Bi-directional
Raw protocol
Note: In the case of the unidirectional communication, be sure to disable the [Printer Status Monitoring].

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless