Toshiba B-SA4T User Manual

- 33 -
2.4 Installation under Windows 2000 (USB with Plug & Play
Enabled)
Note: Proper operation is not guaranteed on the PC running Windows 2000.
1. Turn on the PC.
Note: Log on as the user with administrative privilege.
2. Turn on the printer and connect it to the PC with a USB
cable.
3. “USB DEVICE” is detected and “USB Print support” is
automatically installed.
4. After a while, the “Found New Hardware Wizard” is
displayed. Click the [Next] button.
5. Select the “Search for a suitable driver for my
device (recommended)”, and click the [Next]
button.
6. Check the “Specify a location” checkbox, then
click the [Next] button.

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless