Toshiba B-SA4T User Manual

- 65 -
3.3 Stock Tab
Clicking the Stock tab allows setting various print conditions specific to the printer, such as the media settings,
issue settings, and fine adjustments.
 Media Settings
 Print Method
Enables selecting the print method.
• Direct thermal
• Direct thermal (Head up)
• Thermal transfer
• Thermal transfer (Ribbon save)
The “Thermal transfer (Ribbon save)” is available only to the printer supporting the ribbon saving function.
The “Direct thermal (Head up)” is available only to the RFID-enable printer. The print head is lifted to avoid
RFID tag embedded area to protect the RFID tag. If you select the “Direct thermal (Head up)” for non
RFID-enable printer, an error occurs on the printer.

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless