Toshiba B-SA4T User Manual

- 56 -
3.1 Page Setup Tab
Clicking on the Page Setup tab allows you to specify the default media size, orientation, and other properties of
the media.
Note: When printing on the shared printer, specify the orientation and media size on the client PC from which a print
job is sent. Even if the media size and the orientation are registered to the shared printer, it is not possible to
share such information with the client PC.
 Stock
 Name
Allows specifying a previously loaded stock by name to use, modify, or delete.
 New, Edit, Delete
Allows adding a new label stock specification to the list, editing or deleting a label stock already on the list.
 Section 3.1.1 Registering a new stock or editing the existing stock.
The number of registerable stocks is unlimited.
 Orientation
By clicking on the “Portrait”, “Landscape”, “Portrait rotated 180º”, or “Landscape rotated 180º” radio button,
the print orientation can be changed. The preview page to the left of the orientation buttons will change to
reflect the selected orientation.
Depending on the printer models, the orientation of the “Portrait” may differ.

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless