Toshiba B-SA4T User Manual

- 13 -
2. Installation Procedure
The installation procedure of this printer driver differs depending on the printer models and the connection
methods. Follow the procedure for the appropriate condition to install the printer driver.
If the older version of this printer driver has been already installed, be sure to uninstall it first, restart the printer,
and install the latest printer driver.
 Section 2.10 Uninstalling the Printer Driver.
Preparatory Procedure Common to All Models
Before installing the printer driver, refer to Section 2.1 Preparation for Installation and follow the instructions.
 Printer driver installation method
: Connectable X: Not connectable
Printer model
Connection method
Plug and Play is not used.
Plug and Play is used.
RS232C
LAN
Parallel
Bluetooth
USB
Parallel
B-SX8T (305 dpi)



X


B-SX6T (305 dpi)



X


B-SV4



X

X
B-EV4 (203 dpi),
B-EV4 (300 dpi)



X

X
B-EP2DL-G


X


X
B-EP4DL-G


X


X
B-452-R



X


B-462-R



X


B-852-R



X


B-SA4T (203 dpi),
B-SA4T-CN (203 dpi),
B-SA4T (300 dpi),
B-SA4T-CN (300 dpi)



X


B-SX4T (203 dpi),
B-SX4T-CN (203 dpi)



X


B-SX5T (305 dpi),
B-SX5T-CN (305 dpi)



X


B-EX4T1 (203 dpi),
B-EX4T1 (305 dpi)



X


B-EX4T2 (203 dpi),
B-EX4T2 (300 dpi),
B-EX4T2 (600 dpi),
B-EX4D2 (203 dpi),



X


B-EX4T3 (600 dpi),



X


B-EX6T1 (203 dpi)
B-EX6T1 (305 dpi)



X


B-EX6T3 (203 dpi)
B-EX6T3 (305 dpi)



X


B-FV4 (203 dpi),
B-FV4 (300 dpi)



X

X
B-FP3D (203 dpi)
X

X


X
Note: The above table does not show the all interface types that each printer supports.
Check that your actual connection method is  (connectable), refer to the Installation method by operating
systems on the following page, and follow the appropriate installation procedure.

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless