Toshiba B-SA4T User Manual

- 40 -
7. Check the “Specify a location” check box, and
click the [Next] button.
8. Click the [Browse] button, specify the folder
(C\TEC_DRV) created in Section 2.1
Preparation for Installation, and click the [Next]
button.
9. Make sure the applicable drivers are detected,
then click the [Next] button.
Device driver name
B-SA4G, B-SA4G-CN, B-SA4T, B-SA4T-CN,
B-SX4, B-SX4-CN, B-SX5, B-SX5-CN,
B-SX6T-R, B-SX8T-R, B-852-R, B-452-R,
B-462-R, B-EX4T1-G, B-EX4T1-T, B-EX4T2-G,
B-EX4T2-T, B-EX4T2-H, B-FV4-G, B-FV4-T,
B-EX6T1-G, B-EX6T1-T, B-EX6T3-G,
B-EX6T3-T,B-EX4T3-H
10. When the screen on the right is displayed, click
the [Yes] button.

Toshiba B-SA4T Specifications

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless