3 Tests and Diagnostics
SatelliteA660/ProA660 Series Maintenance Manual
3
3.1 The Diagnostic Test
This chapter explains how to use the Test & Diagnostic program to test the functions of the (Base
on Marseille 10/10G T&D version 1.0) hardware modules. The program consists of a series of
tests that run automatically when the Diagnostics Program items are selected and executed.
NOTES: To start the diagnostics, follow these steps
1. Check all cables for loose connections.
2. Exit this program when you are at Main Menu.
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests:
 CONFIG CHECK TEST
 AUDIO SOUND TEST
 FAN ON/OFF TEST
 MAIN BATTERY CHARGE TEST
 FDD TEST
 MEMORY CHECK
 KEYBOARD TEST
 MOUSE(PAD) TEST
 LCD PIXELS MODE TEST
 MAGNETIC SWITCH TEST
 LAN TEST
 RTC TEST
 BUTTON TEST
 1
st
HDD TEST
 Read DMI TEST
 Write DMI TEST
 3D SENDOR TEST
 TP TYPE R/W TEST
 EE-PROM Setting
 TOSHIBA LOGO SET
 DYNABOOK LOGO SET
You will need the following equipment to perform some of the Diagnostic test programs.
 The diagnostics USB memory
 The diagnostics CD disk
 A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test)
 A LAN loopback
To Next Page
Loading...
Need help?
General
