Toshiba C70-A Series Maintenance Manual

4 Replacement Procedures
4.7 ODD Module (Tray-load)
Removing the ODD Module (Tray-load)
NOTE: The installation and removal procedures are the same for all the modules that can be
installed in the ODD bay. See the appropriate sections for the disassembly procedures of
specific modules.
Remove the ODD module according to the following procedures and Figure 4.15.
1. Turn the laptop upside down.
2. Remove one M2.5x8 screw.
3. Pull the ODD module in the direction of the arrow as indicated in Figure 4.15.
M2.5x8*1
Figure 4.15 Removing the ODD module (Tray-load)
CAUTION: Handle the ODD module carefully. It can become hot during operation.
Satellite A660/ProA660 Series Maintenance Manual 4-23

Toshiba C70-A Series Specifications

General

Processor	Intel Celeron, Pentium, or Core i3/i5/i7 (varies by model)
Storage	500GB or 1TB HDD (varies by model)
Graphics	Intel HD Graphics (varies by model)
Optical Drive	DVD SuperMulti Drive
Connectivity	Wi-Fi 802.11b/g/n, Bluetooth 4.0 (varies by model)
Ports	USB 3.0, USB 2.0, HDMI, VGA, headphone/microphone combo jack