4 Replacement Procedures
Satellite A660/ProA660 Series Maintenance Manual 4-4
CAUTION:
1. Before replacing a component, make sure that the replacement component meets the
required specifications. To avoid laptop failures, never use components that do not meet
the specifications.
2. To avoid internal damage such as short circuits and fire, never drop metal objects such
as screws, pins, paper clips, etc. into the components. When a screw is removed, be sure
to replace a screw that is the same size as the original screw. Make sure that all the
screws are fastened securely. Loose screws can cause short circuits, overheating, smoke
or fire.
3. Before removing a FRU or other component, make sure that all the component cables
have been disconnected to avoid the risk of electrical shock caused by accidental
contact with the energized components.
4. For AC input, be sure to use the AC adapter and AC power cable that come with your
laptop or Toshiba-recommended equivalents.
5. To avoid the risk of electrical shock, make sure that all the replacement components
meet the specifications of the laptop and that all the cables and connectors are fastened
securely.
6. Inside the PC are components that become hot during operation (such as the CPU and
cooling module). To avoid burns, let the hot components cool down before starting
inspection or repair task.
To Next Page
Loading...
Need help?
General
